$279.59
GMP CLIP-ON CABLE BLOCKS - PKG OF 10
This tempered spring steel block is used to
support cable up to 1" during cable pull-out.
P/N: 87265.  
Made in USA.
$57.50
GMP CABLE BLOCK 10700 W/ALUM
ROLLER
This economical block has an aluminum
roller & is used for new build on bare
strand & overlash work. P/N: 10700.
Made
in USA.
GMP CABLE BLOCK 10701 W/RUBBER
ROLLER
This economical block has a rubber roller & is
used for new build on bare strand & overlash
work.  P/N: 10701.  
Made in USA.
$56.25
GMP B CABLE BLOCK
This affordable block is used for new
construction or overlash.  P/N: 70336.  
Made
in USA
.
GMP CABLE BLOCK 73305
This block is used to support one
cable up to 1" on 1/4" bare strand. The
high strength aluminum frame has a
spring-loaded steel pin that keeps it
locked on the strand & the cable on
the nylon roller.  P/N: 73305.  
Made in
USA.
$28.00
GMP CABLE BLOCK 75000
A block used on 1/4" bare strand when lashing
cable up to 2-3/4".
  
P/N: 75000. Made in USA
$109.05
GMP D AERIAL CABLE BLOCK
A heavy-duty block used during new
strand lashing. P/N: 72680.  
Made in
USA.
$115.00
GMP F AERIAL CABLE BLOCK
Heavy-duty block to be used on either new
strand or when overlashing.  P/N: 08093
Made in USA.
$136.25
GMP OVERLASH ROLLER 4"
Simple & effective, this block handles cable
or bundles up to 4".  P/N: 87210.  
Made in
USA
.
$26.25
GMP CABLE BLOCK 4 ROLLER
This block can support multiple cables
Made in USA.  
38100
$94.11
GMP H CABLE BLOCK
Used to pull cable toward or away from
corner poles or other locations where a
single block is required. P/N: 08608.
Made in USA.
$265.00
GMP POLE MOUNT BLOCK
This block is used to support cable at the pole
using a 5/8" suspension bolt or 3-bolt clamp. P/N:
70335.  
Made in USA.
$75.00
GMP HANGER BRACKET
Used for hanging cable blocks at the
pole as temporary support.  
P/N: 70265.  
Made in USA.
DOUBLE COAX CABLE BENDER .75"
Coaxial Cable Bender for up to two (2) cables.  
P/N: 71660
Made in USA.
$552.94
DOUBLE COAX CABLE BENDER UP TO
1.25"
Coaxial Cable Bender for up to two (2)
cables with a maximum diameter of 1.25".
P/N: 71661.  
Made in USA.
$688.23
CABLE BLOCK PUSHER - 24"
Positioned between the lasher and first block for
spacing that is especially needed when lashing
multiple cables. P/N: 70431.  
Made in USA.
$105.00
$25.00
This block can support multiple cables during new
construction.   Can accommodate four 1" cables
on nylon rollers. Bi-directional cam keeps block
stationary during cable pull-out  locking gates keep
cable(s) on the rollers
The block fits over existing cable bundles up to 2".  
The block can be used for new or old
(overlash)construction.  The "clip-on" design makes
for fast work when time is money.   The unique
housing profile keeps the lashing machine (71422 &
86070) from "riding" over the unit.  The pliable
urethane roller is forgiving of field abuse and will
never mar or scar cable
Can accommodate up to a 2" cable.  The strand
wedges in the "V" notch of the sturdy cast
aluminum frame.  The spring-loaded strand
retaining pin will clear two previously lashed 3/4"
cables for overlashing.  A rotating gate keeps line
or cable on the roller
Can accommodate up to a 2" cable.  The strand
wedges in the "V" notch of the sturdy cast aluminum
frame.  The spring-loaded strand retaining pin will
clear two previously lashed 3/4" cables for
overlashing.  A rotating gate keeps line or cable on the
roller.
This affordable block is used for new construction or overlash

Can support a cable up to 1-3/8" prior to lashing
Can fit over an existing bundle up to 2"
A replaceable gritty non-skid surface minimizes the block from traveling during
cable pull-out
A rotating keeper locks a cable or pulling line on the roller
A hole in the keeper handle allows placement using lay-up sticks
The frame is made from zinc-plated steel to eliminate rust & keep its shape
Bi-directional cam keeps block stationary during cable
pull-out.  Frame & sheave are made from cast
aluminum-magnesium alloy.   Eye hook on cam handle
allows placement using Wire Raising Tool (06355) with
wooden (66000-66002) or fiberglass (24193-24194)
lay-up sticks
Heat treated aluminum roller can accommodate cable up to 2-3/4" on
strand sizes of 1/4 - 3/8". Bi-directional cam keeps block stationary during
cable pull-out. Heat treated aluminum frame has steel inserts on the
underside of each strand hook for less wear and smoother sliding when
pushed by lasher (71422 & 86070). Eye hook on cam handle allows
placement using Wire Raising Tool (06355) with wooden (66000-66002)
or fiberglass (24193-24194) lay-up sticks
Made In America!
Heat treated aluminum roller can accommodate cable
up to 2-3/4" on strand sizes of 1/4 - 3/8".  Bi-directional
treated aluminum frame has steel inserts on the treated
aluminum frame has steel inserts on the underside of
each strand hook for less wear and smoother sliding
when pushed by lasher (71422 & 86070). Eye hook on
cam handle allows placement using Wire Raising Tool
(06355) with wooden (66000-66002) or fiberglass
(24193-24194) lay-up sticks
Made in America!
Made in America!
The roller is made from industrial conveyor bearing material for high
abrasion resistance with low rolling friction. A spring-latch gate
encloses cable & strand within the frame. Steel frame allows "in field"
straightening if dropped or bent. A narrow profile & stackable design
allows for high density storage.
Made in America!
Made in America!
Made in America!
Made in America!
Made in America!
Can accommodate a cable up to 3" at higher stress corner poles.
Clamp mechanism securely latches onto strand, allowing the sheave
to tilt with the load without prematurely releasing. The sheave is
enclosed in a forged, hinged steel frame 5000 lbs. load capacity
rating.
The roller can accommodate a cable up to 2 3/4". The
zinc-plated steel frame has a retainer to keep cable or
pulling line on the roller. 50 lbs. rating capacity
Used for hanging cable blocks at the pole as temporary support.
Can be mounted on a "J" bracket or suspension bolt.
Made from light weight aircraft aluminum for easier use.
Forms expansion loops using four (4) nylon shoes and the
positive action of a ratchet wrench. Nylon shoes provide
cable support with minimal stress during the bending
process. Painted bright orange for added safety
Easy-grip pawl ensures positive engagement into gear rack. Bronze
bushings provide smooth operability and prevent galling. Frame and
gear rack are attached with a reinforcement plate to withstand pressure
when forming dual trunk cables. Synthetic shoes driven by vertical gear
rack form loop.
Linesman Tool Supply
A Vietnam Veteran-Owned Company
a subsidiary of BDI Datalynk, LLC
LTS offers a complete line of aerial, underground and cable placing tools for the telephone and CATV
construction trade. We stand behind every product we sell. You have our guarantee. If we don't believe in it, we
don't sell it. Quick, reliable same or next working day shipping from our stock to your door.
Questions? Ask the Owner.
Bob Ballard
Master Fiber Optics Instructor
Certifed by the
FOA.
Email
Ph: 512-785-9024
Home           A to Z Index             Send Email         Privacy Policy        About Us        Site Map         View Cart   
Can't find what you need?  Give me a call
and perhaps I can help.
 
We built this great on-line source for Linemen & Cable Construction Technicians to allow for a ONE STOP source for all types of copper and fiber
placing equipment.  No need to shop anywhere else.  Your specific tool requirement is a "click away" from being delivered to your job site.
Return Policy:  No returns will be accepted after 30 days from date of shipment.  There MUST be an RMA # with
every shipment that is returned.  If the RMA # is not clearly visable on package and/or packing list, the shipment will
be refused.  Further, there will be a 15% re-stocking charge on all returned items.  If there are Warranty Issues,
those will be dealt with on an individual basis.
AERIAL CABLE BLOCKS
LEMCO PT-596 OVERLASH CABLE PULLER
This unit is designed to pull out up to four cables and works on
packages up to 2 3⁄4” in diameter.
P/N: 78596

This unit is designed to pull out up to four cables and works on
packages up to 2 3⁄4” in diameter. Opposing roller arms retain the
puller to the existing cable and offer quick pole transfer. Polyurethane
rollers fitted with bronze bearings yield high mileage production. The
steel frame is protected by a black polyester powder coat. Wt. 6.3 lbs.
$309.17
Lemco PT-596 Overlash Cable Puller
Return Policy:  No returns will be accepted after 30 days from date of shipment.  There MUST be an RMA # with
every shipment that is returned.  If the RMA # is not clearly visable on package and/or packing list, the shipment will
be refused.  Further, there will be a 15% re-stocking charge on all returned items.  If there are Warranty Issues,
those will be dealt with on an individual basis.
How To Place Orders:
4 Ways To Place Orders at Linesman Tool Supply
1.) Via PayPal - Authorized PayPal Account
2.) Via Email - bob@linesmantoolsupply.com
3.) Via Phone - (512) 785-9024
4.) Via Credit Card

Air Freight or Special Handling? NO WORRIES!
GIVE US A CALL and we will handle it for you.
Do the job right with the
right tools.  Now go out
and do the right thing!
$48.37
Made in America!
PRODUCTS & SERVICES

Specials and Clearance Items -
no returns, no exchanges, and ALL Sales are
Final.
--------------------------------------------------------------------
Aerial Tools & Equipment
---------------------------------------
Underground Tools
---------------------------------------
Cable Installation Tools
--------------------------------------
Hand Tools
----------------------------------------
Safety Equipment
----------------------------------------
Fiber Optics Tools
----------------------------------------
Linesman Training
----------------------------------------
Fiber Optics Training
----------------------------------------